Bumper Profile for Walls at Support Points or Frequent Friction. Design with Double Arch and Wide Protection Surface: 300 mm Height. Easy to Install and Clean.
The double arch design ensures a broad impact base for vehicles and heavy loads. Fixing the Bflex profile directly onto the wall ensures maximum protection along the entire installation length.
Modules of 2000 mm for continuous fixation according to customer needs. Other lengths for individual modules available upon request.
Wall or panel fixing accessories not included.
Soft Bollard is our flexible bollard with high-visibility reflective strips.
Ideal for marking outdoor areas or for temporary traffic direction. We recommend its use in outdoor facilities, thoroughfares and car parks.
In the event of accidental collisions, it does not cause damage to vehicles due to its lightweight construction.
Despite this, it is incredibly resistant, being able to fully recover from the deformation suffered in the collision.
Easy to install.
Available in various colors.
Visiboard is our new signaling cap. It is an accessory that can be integrated into the MPM range of guards, even those already installed.
The universal signage in the cap provides clear and intuitive messages to personnel and drivers of vehicles: conduct, hazard, directional or general safety warnings.
It is recommended for installation in areas of high vehicle and pedestrian traffic.
Can be swiveled 360 degrees, in 45 degree steps, on any MPM compatible platform.
A wide choice of signals is available.
Visipole is our protection pole with complementary signage.
The universal signage on the cap provides clear and intuitive messages to personnel and vehicle drivers alerting them to dangers, providing directions or safety warnings.
Its solid construction is designed to protect against impacts from medium to heavy traffic loads.
It is the ideal tool for areas of high vehicle traffic.
Can be swiveled 360 degrees, in 45 degree steps. Wide choice of signals available.
SOFT HUG is our new column protection.
Soft, aesthetic and easy to install. The protection is designed to wrap around the entire column and supporting structures of buildings and industrial plants.
Thanks to its padding, it cushions impacts without causing harm to pedestrians. It comes in a high-visibility color to make it immediately recognizable even from a distance.
Different sizes are available to suit the column to be protected.
It does not require fastenings thanks to the velcro closure.
It is not suitable for absorbing heavy shocks and impacts.
Ped 90 pedestrian barrier with additional ground level reinforcement to protect against lower fork impacts.
The high-visibility, scratch-resistant color of Pedestrian 90 Ground Level Reinforced makes it easy to identify pedestrian areas while limiting the risk of collision, and maintaining its distinctive design.
The height of the ground level reinforced element is designed for optimal pedestrian protection. Since it is completely attached to the pavement, it does not allow forks to pass through.
This evolution of our popular people protection barrier represents an excellent meeting point between durability and flexibility.
2000 mm modules are available.
Fixing accessories included.
Innovative protective pedestrian barrier for medium-heavy load handling areas.
Thanks to our LINK technology, the height of the crossbars is adjustable to provide protection in the most critical areas to be protected and to adapt to the type of carts used. The structure is adjustable directly on site.
The Link 120/1 version employs a single adjustable crossbar as the lower stringer, complementing it with two fixed crossbars.
2000-mm modules.
Innovative pedestrian protection barrier for areas where the handling of medium-heavy loads is observed.
Thanks to our LINK technology, the height of the crossbars is adjustable to provide protection in the most critical areas to be protected and to adapt to the type of carts used. The structure is adjustable directly on site.
The Link 120/2 version uses two crossbars that can be adjusted thanks to the link attachment, complementing them with a fixed crossbar.
2000-mm modules.
Innovative pedestrian protection barrier designed for medium to heavy load handling areas.
Thanks to our LINK technology, the height of the crossbars is adjustable to provide protection in the most critical areas to be protected and to adapt to the type of carts being used. The structure is adjustable directly on site.
The Link 120/3 version employs 3 adjustable crossbars to ensure maximum adaptability and resistance to possible impacts.
2000-mm modules.
Patented barrier that protects structures and pedestrians in areas meant for moving loads. Designed with an innovative mechanism that connects rails through a PIN plug and a special soft and shock-absorbing gasket. The barrier now is far more resistant when impacted. The high visibility and anti-scratch color allow to easily identify pedestrian areas and to protect them limiting the risk of collision. 2500 mm modules available. Fixing accessories included.
Patented barrier that protects structures and pedestrians in areas meant for moving loads.
Designed with an innovative mechanism that connects rails through a PIN plug and a special soft and shock-absorbing gasket. Its robust GRD 200 supportive pole is equipped with further shock absorbers placed internally and on the plate. The barrier now is far more resistant when impacted. The high visibility and anti-scratch color allow to easily identify pedestrian areas and to protect them limiting the risk of collision. 2000 mm modules available. Fixing accessories and shock absorbing pad included.
Protection system installed on loading bays. It prevents damages caused by the impact of heavy vehicles with the dock during loading and unloading operations. This protection is wear-resistant and durable over time.
Shockproof protection system installed nearby loading doors. It prevents the staff from falling in case of open and unattended loading bays. This protection is light weighted, easy to lift and equipped with a joint system to guarantee a safe opening of the barrier. It’s space saving and adjustable to all loading areas until 3m. Fixing accessories included.
Light traffic bollard. Also suited for low temperatures. Ideal for areas used by hand trucks. Perfectly rounded design with cap in anti-shock material. Fixing accessories are included and totally hidden, making the protective bollard suitable for hygienic environments. Chemical anchor necessary and available on request. The fixing is removable, with the possibility of replacing the protection without changing position.
Small upright protection. Unique rack protection: the profile is equipped with three internal shock absorbers made of soft anti-shock material that allows it to absorb impacts with moving vehicles. The design is compact, with no corners or protrusions, guaranteeing the perfect fit of the protection to the upright even after impact. No floor fixing: it doesn’t take up precious floorspace or hinder the handling of pallets. Quick and intuitive installation directly on the upright in two simple steps thanks to RP CLICKs. Standard heights available: 600 mm and 400 mm.
Self-supporting, custom column protection. Does not require fixing either to the floor or to the column. Compact and flexible, it is suitable to protect concrete or steel pillars and Ipe beams from impact caused by moving trucks and forklifts. It adheres to the column and does not encumber vehicle corridors or working areas. Minimum size 100 x 100 mm.
Floor cable protection system in soft material. Diameter Ø10 – Ø20 – Ø10. Space-saving, resistant and easy-to-install cable cover. Suitable for work areas with pedestrian passage.
Protective barrier installed on the ceiling to warn forklift drivers in case of low ceiling or presence of an obstacle. The warning bar avoids damage to doors, loading bays, walkways, structures or overhead systems, which are very expensive to restore.
It is available in different lengths.
Three-sided custom column and pillar protection. Compact and flexible, it adheres to the column and does not encumber vehicle corridors and working areas. Fixing to the plate on the wall supporting the column is required. Fixing to the floor is not required. It features anti-collision caps and it is suitable for areas where trucks and forklifts of different loads are handled. Available in different heights. The protection’s width can also be adjusted on site thanks to the innovative GENIUS HUG system.
Wheel stop is designed to stop or to place the wheels of vehicles avoiding accidental impacts. It allows to limit parking areas, vehicle circulation and pedestrian crossing areas. Car stop is made of weather-resistant recycled rubber and thanks to the reflective elements, it is highly visible to drivers and pedestrians.
Protective barrier installed on the ceiling to warn forklift drivers in case of low ceiling or presence of an obstacle. The warning bar avoids damage to doors, loading bays, walkways, structures or overhead systems, which are very expensive to restore. Warning Bar/ Information Sign option is equipped with an additional warning sign to attract the attention of forklift drivers. It is available in different lengths.
The Genius Hug system is the most effective and fastest tool to perfectly adapt the size of the HUG TOWER protection to the structure of the underlying column.
It can be used directly on site by the installation team or even by the end user. It allows finishing the work of installing a complete protection system without interruption, responding to the dynamic needs of work and logistics environments.
Wheel stop is designed to stop or to place trucks and heavy vehicles at a precise point in loading, maneuvering and parking areas of logistics centers and warehouses. Wheel stop is made of weather-resistant recycled rubber. Thanks to the reflective elements it is easily visible to drivers and pedestrians. Fixing accessories are available on request according to the kind of floor.
Il sistema Genius Hug è l’attrezzo più efficace e veloce per adattare perfettamente la dimensione della protezione HUG TOWER alla struttura della colonna da proteggere.
È utilizzabile direttamente in loco dal team d’installazione o anche dall’utilizzatore finale. Permette di terminare senza interruzioni il lavoro di messa in posa di un completo sistema di protezione rispondendo alle dinamiche esigenze degli ambienti di lavoro e logistici.
Ø12mm alternative screw for FIX P 90 and 150, GRINCO 90 and GRINCO 150 plates. advantages: greater resistance, smaller footprint; no chemical anchor required; reusable up to 3 times ensuring the same resistance; quick and easy fixing and sealing less affected by the right tightening torque and by the cleaning of the hole.
Galvanized and varnished FIX P 90 plate suitable for the product line designed for impacts from light loads. Advantages: optimized shape to better withstand the most critical impact area.
Heavy traffic bollard. Also suited for low temperatures. Perfectly rounded design with cap in anti-shock material. Fixing accessories are included and totally concealed, making the protective bollard suitable for hygienic environments. Chemical anchor necessary and available on request. The fixing is removable, with the possibility of replacing the protection without changing position.
Soft corner guards for surfaces of 90°. Fix with double-sided adhesive tape already applied on the profile. Available colours: black-yellow and white-red. Available lenghts: 1000 mm and 3000 mm.
